View Single Post
  #333   Report Post  
Old December 4th 03, 03:01 AM
Dave Heil
 
Posts: n/a
Default

Len Over 21 wrote:

In article et, "KØHB"
writes:

"Mike Coslo" wrote



POINT B
------------

That particular power level has a real purpose. The purpose is two-fold.


Well, if YOU said it, it must have a "real purpose." :-)

Purpose #1) It allows us to institute a "learners permit" class of license
in which we can limit power to a level which FCC has stated is safe for both
the user and unknowing passers-by.


What do you mean "we," white man?


He added "unknowing passers-by". That pretty well covers you.

I think you think you think more than the OET and the IEEE and the
USAF and the ANSI.

Purpose #2) It allows us to institute a "learners permit" class of license
in which the power level minimizes the unwanted side-effects of granting
broad spectrum access to relatively underqualified operators. Now, before
you spin up your rotors about "but QRP operators work around the world",
bear in mind that most of the "bad" signals heard on HF are the result of
ignorant operators trying to run a lot of power, and the consequent
splatter, flat-topping, birdies, over-compression, etc. On the other hand,
I've never heard a distorted or crappy QRP station. In further support of
the idea is the fact that all these 100W-class rigs you keep harping on are
running at near their designed-in upper capability, making them more likely
to become purveyors of all the crappy-signal symptoms I just talked about.
At 50W they are much less likely to be straining their design specifications
and consequently radiating cleaner signals. In the hands of even a QCAO
life-member it would be hard to splatter/chirp/over-modulate when you're
running at half the design limit of the rig.


Of course. A "learner's permit." As if the ONLY radio emitters in
the world came from amateur radio stations. :-)


A learner's permit for amateur radio to be used in the pursuit of
amateur radio. You know, it's one of those things in life of which you
are not a part.

Geez...for a work manager supposedly with a degree you sure don't
know much about equipment that can go wrong, be misadjusted, and
lots of other little nasties lurking inside electronics boxes. Tsk, tsk.

"In the hands of you QCAO members," the "expertise" in radio
matters went out the window if you think that RF power output is the
ONLY thing causing splatter/chirp/over-modulation (etc.).


Without RF power output, you wouldn't notice it, Len :-) :-)

Dave K8MN