Ken Bessler wrote:
Should I feed it with 300 ohm HD twinlead, 450 ohm ladder line with or
without a Bal-Un or rg58 coax with or without a Balun?

If you want to approach the limits of efficiency, feed it with open-wire
line, usually around a Z0 of 600 ohms. Feedline length will be important.
IMO, use a 1:1 balun/choke at the tuner output.
--
73, Cecil http://www.qsl.net/w5dxp



-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----