View Single Post
  #2   Report Post  
Old October 11th 03, 09:04 AM
Brainbuster
 
Posts: n/a
Default

don wrote in message . ..
a co-worker of mine has an emporer ts-5010
the backlights for the lcd display quit working,,,,again
these burned out a few years ago,,and he had them repaired in tenessee
at a shop he found,,it only set him back 30 bucks
so this time he takes it to litchfeild radio here in ohio
and the guy doesnt even pop the top
claims he cant fix it,parts no longer available
so he turns to me
seems like a simple fix
took guy in tenesse a matter of minutes
do any of you know of a part number for replacement lights for this
or a source for them
thanks in advance
don


Hi.

The bulbs used in such radios may be either 6 or 12 volts. 6 Volt types are
connected as pairs in series. These bulbs are also used in car stereos here
in the UK, and are easily found in electronic component stores here. You
could try such shops, but be aware that the bulb length should not be too
great... some are longer than others.
I find it hard to believe that, if it is a faulty bulb, a shop cannot get
one anywhere.


Regards,

Peter.