
June 12th 04, 08:57 PM
|
|
Here are some pictures
http://home.earthlink.net/~cjohnson1379/
"Chris" wrote in message
nk.net...
I have constructed a homeade antenna that is mounted on a trunk-lip mount
on
a Nissan Sentra. The bottom is 18" of 1/2" copper pipe with a 3/8" theaded
adapter soldered in the bottom. There is a 9" long peice of pvc with a 2"
diameter 6ga. copper coil around it. Then there is 4" more copper pipe
with
a 3ft' stainless tip on top. The problem is that it would be too easy to
bend the trunk with copper pipe. I thought about a spring but then the
whole
thing would bend too much when the trunk is opened. If I move the coil
down
below roof level, the SWR goes way up. I thought about using pvc for the
lower part but I can't quite figure out how to construct it. I may take
some
pictures of what I have. Stay tuned......
|