I found it! The electret mic element was bad. I have a nearly identical mic
that worked just fine even with the gain wide open. I looked everything over
closely and compared the mics. I noticed one thing. When I put my fingers
close to the mic element, it would squeal. The good one didn't do that. I
found an old electret element lying around, put it in the mic, and it works
just great now.

I had a Uniden Pro510XL doing the same thing a few months back. I think I'll
try a new mic element for it too.
"Keith Hosman KC8TCQ" wrote in message
...
Chris wrote:

I connected a Cobra CA-75 power mic to My Cobra 25 WX LTD Classic and it
squeals like crazy. If I hold it just right it won't but it's too prone
to
squealing. The radio is fine with a stock mic and the power mic is fine
on
other radios. I have also had another radio with a power mic in the same
vehicle with the same antenna with no problems. Is there an easy
solution to
this?

Chris

Do you have talk back installed in the radio? manay times if talkback is
installed and the mic is too close to the radio it will feedback.Also
(and this is one of the more common mistakes) is the mic wired properly
for the radio.

73 de Keith

--
KC8TCQ

Know thyself. If you need
help, call the C.I.A.