View Single Post
  #16   Report Post  
Old April 29th 04, 12:51 AM
Jerry Martes
 
Posts: n/a
Default

Roy

I'm honored that you take time to post this information for my education.
It is almost an unbeleivable coincidence that _you_ mention EZNEC. I had
that program recommended to me by a friend who told me about it this past
week end. I want to try to understand (see) what kind of pattern I'm
getting from an antenna I made for Weather Sattelite (137 MHz) reception.
I have downloaded the EZNEC and only my other projects have kept me from
starting to learn how to use it.

Thanks
Jerry


"Roy Lewallen" wrote in message
...
When the transmission line portion is nearly a quarter wavelength long,
it has very little effect on the feedpoint impedance, so the resonant
length will be about the same as it would be if the transmission line
didn't exist. In the case of TV twinlead, though, if shorted at the
ends, the transmission line can make a noticeable impact on the
feedpoint impedance. It would take only a few minutes with EZNEC, using
the method I described earlier of modeling a folded dipole or monopole
as an unfolded dipole or monopole with a transmission line stub in
parallel with the source, to see how great the impact is. With this
model, you can give the transmission line whatever velocity factor or
length you choose, independently of the "antenna" portion of the model.
If you use the same twinlead to make antennas for different bands, the
impact of the transmission line will be different on each band because
the transmission line isn't being scaled with frequency. Therefore, any
conclusion you reach about the impact of the transmission line on the
antenna length will be quantitatively correct only at one frequency
(and, of course, only the assumed type of twinlead).

I don't have the time right now to do the modeling, but if you're truly
interested, you won't mind taking the time to do it yourself.

Roy Lewallen, W7EL

Jerry Martes wrote:

Roy

Thanks for the clear and meaningfull response to my post. I'm not
qualified to enter this discussion. I'm in the learning mode. I did

wonder
if the dielectricly loaded "shorted stub" transmission line (1/2 the

folded
dipole) wuld have a shortning capability for determining antenna length.

As
I read it, the VP of the twin lead does effect the folded dipole's

length to
aceive resonance. And, the amount of "shortning effect" is somewhere
between 20 percent and 3 percent in your example of twin lead with

VP=0.8
.Please correct me if I'm wrong, but, I'd expect the "shortning effect"

to
be much closer to the 3 percent end of the scale for reasons that would

be
too confusing for me to try to explain. ( besides, I'm probably wrong

in my
thinking)

Jerry