2nd that, normal problem, there is not strain relief for the connector.
simple bit of soldering & it's fixed

mike

"Bob Parnass" wrote in message
news
On Sun, 28 Dec 2003 23:08:14 +0000, JimG wrote:

Scans through freqs but never picks up anything. Squelch (and audio)
works.
I have had this unit for several years - bought it new. Any techs here
that
can tell me what I might check?

Check for a defective antenna or antenna jack.
The center pin in the antenna could be broken off.

Another common problem is that the center contact of
the antenna jack has become disconnected internally from
the printed circuit board.
--
================================================== =======================
Bob Parnass, AJ9S GNU/Linux User http://parnass.com



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.555 / Virus Database: 347 - Release Date: 23/12/2003