View Single Post
  #2   Report Post  
Old June 12th 04, 07:20 PM
bill carty
 
Posts: n/a
Default

Wouldn't the 2 metter band rightfully go from about 135 mHz through mayby
160 or 170 Mhz. I am not certain that the writer was asking for the ham 2
meter freqs but a general question of what is two meters freq?

You can figure it out mathematically but I have to look in the book to find
it.

Bill Carty

"Zephyr_Mark_Two" wrote in message
m...
(KHenne3572) wrote in message

...
what frequency range is in ther 2 meter area.



2 Meters (144-148 MHz):

144.00-144.05 EME (CW)
144.05-144.10 General CW and weak signals
144.10-144.20 EME and weak-signal SSB
144.200 National calling frequency
144.200-144.275 General SSB operation
144.275-144.300 Propagation beacons
144.30-144.50 New OSCAR subband
144.50-144.60 Linear translator inputs
144.60-144.90 FM repeater inputs
144.90-145.10 Weak signal and FM simplex
(145.01,03,05,07,09 are widely used for packet)
145.10-145.20 Linear translator outputs
145.20-145.50 FM repeater outputs
145.50-145.80 Miscellaneous and experimental modes
145.80-146.00 OSCAR subband
146.01-146.37 Repeater inputs
146.40-146.58 Simplex
146.52 National Simplex Calling Frequency
146.61-146.97 Repeater outputs
147.00-147.39 Repeater outputs
147.42-147.57 Simplex
147.60-147.99 Repeater inputs

Notes: The frequency 146.40 MHz is used in some areas as
a repeater input. This band plan has been proposed by the
ARRL VHF-UHF Advisory Committee.

http://www.arrl.org/FandES/field/reg...ndplan.html#2m