One good method is to cut a piece of wood that fits your window opening then
drill your holes in that. A nice 1*4 or 1*6 works well. Other folks use
antennas mounted in the attic, drop the line down into a wall cavity and
fish it out at a wall plug or phone jack... Just a couple ideas.

"Nick" wrote in message
oups.com...
This has always intrigued me. I live in a typical southern house built
in the 70s. No frills architecture, one-storied,mostly wooden, a small
backyard and no basement. If I were to set up an external antenna, how
do I get the Coax feed inside. I don't own this house, so I don't wanna
drill holes in the door/window frames or on the walls. Any hope for me
? In the worst case , I'd have to get the feed through the fire-place
chimney thats no longer used.
-Nick