I just performed the case/cable update. It's not fun to do.
Difficult getting everything back together. You can order the
necessary part at Partsolver.com. It's X33723401. This comes with
the two ribbon cable and the whole lcd cover/speaker cover front case.
So if you have a scratched screen the fix will take care of that too.
You'll need a super small screwdriver - jewelers screwdriver. Also,
the speaker is glued in - careful getting it out. If you have any
questions post them here and I'll send info to your Email.

On Fri, 27 Feb 2004 01:25:15 +0100, "Knut Otterbeck"
wrote:


Hi All,

Please be aware this procedures is quite involved ,it's easy to break
a component or contact.

I tried performing a mod to make better room/passage for the old
type cable , but decided against after finding the quarters too cramped.

Was lucky to successfully put the set back together again, especially
the power switch on the left side was hard to get back in place.

Beware , and if you have a working old cable version - live with it and
try not folding/closing the set at all times.

Keep it mostly opened and store in a cupboard/drawer/box ,whatever...

Greetings,
Knut Otterbeck
Oslo - Norway

"Chris Malcolm" skrev i melding
...
Igor Gros writes:

B Banton wrote:

Anyone have a link to a parts list for this radio?

Maybye that should help ?

http://www.dai.ed.ac.uk/homes/cam/gadgets/SW100.html
http://www.tesp.com/SW100FAQ.htm

Note that there was a revision of the SW100 in 1997 involving some
improved circuitry, a new screen cable, and a new faceplate to
accomodate the cable. Some of the details are mentioned in the above.
The distinguishing feature is the hinge slot in the later model. The
first URL above has photographs of the two models.

--
Chris Malcolm +44 (0)131 651 3445 DoD #205
IPAB, Informatics, JCMB, King's Buildings, Edinburgh, EH9 3JZ, UK
[http://www.dai.ed.ac.uk/homes/cam/]