Mike Coslo wrote:

I just got done installing radials for a new antenna, and was distressed
at the amount of time it was taking.

I was looking at some power tools that might speed up the trenching
process. Power edgers looked promising, but were 90 - 100 dollars for
electrical models, and more for the gas powered ones.

Finally I hit on something. I bought an inexpensive electric chainsaw.
I'm sure the neighbors thought I was a lunatic, but trenching for the
radials took surprisingly little time. So I laid all my radials in one
afternoon. It would have taken even less time if there had been an extra
person around to help.

Caveats:

This is of course *dangerous* - don't ever do it!!! Chainsaws are sharp
and nasty.

It wore out the Chainsaw chain. That really isn't a big deal. I'm just
going to save it for the next time I need to trench radials.

The chainsaw needs washed and lubed after trenching.

But it was quick. The radials are in, the post for the vertical is in
and concrete setting as I write.

Just thought I'd share this with the group. I never saw anyone else
saying they did anything similar, so I either stumbled on something, or
I'm completely whacked! ;^)

- Mike KB3EIA -

I used a pizza cutter! Still use it for pizza too but have to
press harder!

Irv VE6BP
--
--------------------------------------
Diagnosed Type II Diabetes March 5 2001
Beating it with diet and exercise!
297/215/210 (to be revised lower)
58"/43"(!)/44" (already lower too!)
--------------------------------------
Visit my HomePage at http://members.shaw.ca/finkirv/index.html
Visit my Baby Sofia website at http://members.shaw.ca/finkirv4/index.htm
Visit my OLDTIMERS website at http://members.shaw.ca/finkirv5/index.htm
--------------------
Irv Finkleman,
Grampa/Ex-Navy/Old Fart/Ham Radio VE6BP
Calgary, Alberta, Canada