View Single Post
  #1   Report Post  
Old February 11th 05, 10:40 PM
Bill Ogden
 
Posts: n/a
Default Small loops for reception

For the first time in many years I have been listening a lot on the low
bands (160/80/40). It seems there is much more background noise than when I
was in my teens, but that may be my selective memory at work. I am in the
far suburbs trying to use a half-sloper and an inverted V -- both with the
peak at about 53 feet. I think most of the noise is "natural" (except for a
15Khz harmonic every now and then.)

I started reading about small loops for receiving on 160 and 80. In
particular I have been reading about:

(1) the 4-turn loop on 4-foot cross arms (W1FB),
(2) the 4-turn coax loop (in a 9-inch diameter) (W1FB),
(3) an 18-inch ferrite rod unit described by G2BZQ

All of these were described as better receiving antennas "in the house" than
the authors' more conventional outside antennas. W1FB thought the 9-inch
loop was better than the 4-foot unshielded loop and apparently did not think
much of ferrite-stick antennas.

What is the experience of those on this newsgroup? Are these antennas
really better (in the house, and even in the basement) than conventional
outdoor antennas? Are they significantly better when used outside and
perhaps elevated a bit? I realize they are inconvenient because they must
be tuned even for small frequency changes. It seems they are very
directional for nulls but fairly broad for other responses. Is the same loop
good for 160 and 80 (and maybe even 40)?

Bill
W2WO