According to Federal Standard 1037C at URL:
http://www.its.bldrdoc.gov/fs-1037/


continuous wave (cw): A wave of constant amplitude and constant frequency.
(188)
------------------------------------------------------------------------
From http://life.itu.ch/radioclub/rr/ap01.htm

What you really meant was Continuous wave telegraphy, Morse code

A1A -telegraphy (on - off keying) without modulation by an audio frequency

--------------------------------------------

Of course the spoofer knew all this -- just spoofing you right back -- 10-4
?

----------------------------------------


"Dbowey" wrote in message
...
SITN posted:
It really is originally from a spoofer who doesn't know the difference
between a Continous Wave emmission and a Morse Code transmission.

As far as 10 codes -- lots of 10-10 activity on 28 MHz -- 10-4??

Wonder if original poster knows what 10-10 International is -- probably
not


"David L Thompson" wrote in message
link.net...
Is this wishful thinking? Well over 60% of Dx spots are CW on Dx
summit.
Hams like G3SXW on operate 100% CW.
Dave K4JRB

Alfred Carlson wrote in message
...
Its been rumored that CW emission to be banned. Also, the 10 code
is
to replace standard Q codes that were related to CW operation in years
past.
CW keys and keyers to become illegal.
-----------
The spoofer understands the terms quite well, but you apparently do not
understand their common use.

On a similar note, hams don't use Morse code transmission.

Don