Larry Brasfield wrote:

"Tim Wescott" wrote
in message ...
...

In an AT cut crystal the overtone modes are close, but not exactly on, the odd harmonics of the fundamental. Furthermore, all of
the literature that I've read on AT cut crystals reports that they vibrate in the bulk of the crystal, in shear mode -- see figure
7 he http://literature.agilent.com/litweb/pdf/5965-7662E.pdf.


One effect to watch out for with use of unspecified
overtone modes is that the behavior of the resonator
is not ideal; the presence or size of nearby spurs and
the Q depend on how uniform the thickness is that
determines frequency and the placement and size of
contact metal. The wavelength is typically much less
than the dimension along the non-shearing axis, so
having a single mode of resonance near the nominal
frequency or its overtones is not guaranteed, except
by careful construction and verification. So, clearly,
a guarantee about the behavior near the fundamental
resonance cannot be extended to the overtone modes.

If I was trying to build a stable and pure oscillator
operating at a crystal overtone, I would buy the
crystal specified for the overtone I would be using.

I pointed that out in a previous post. But hey -- wouldn't it be fun to
have an oscillator that yodels?

--

Tim Wescott
Wescott Design Services
http://www.wescottdesign.com