OM!!! That Alzheimer's is kinda gettin' bad, they got medication for
that yanno... you are up to 3 repeats a message... when it gets to 5
they send the guys in white coats over to your house...
John
"mopathetic didn't camp at Dayton! CHICKEN BOY!"
wrote in message
ups.com...
John Smith wrote:
... the difference between 35 watts and 5 watts, at any
distance, is so small as to be un-noticeable... I would not worry
about
running that full time--up to about a 100 watts is nothing to worry
about (even much larger power in mobiles)... I would begin to worry
only
if I was running high power though a base station... I only run 3.5
Kilowatts when the skip is in on my beam, can pretty much talk to
anyone
I can hear... but with that kind of power I realize there is a
risk...
must have been awfully lucky though since I have been running greater
than 1Kw on skip ever since the early 1970's and have yet to even get
a
notice...
I leave my little 300 watt base linear on all the time... but I don't
tell anyone and I don't hook up a BIG LOUD MIKE which ****es everyone
off, I DON'T ROGER BEEP and I DON'T CUSS and DON'T make an obnoxious
A$$
of myself... it makes it sound like I am not running power and most
just
think I have a good setup and antenna...
Warmest regards,
John
"mopathetic didn't camp at Dayton! CHICKEN BOY!"
wrote in message
oups.com...
Cliff wrote:
Picked up a small amp 35 watt. It shows to be putting out the 35
watt
full but it still will not let me get out any further than about
the,
well really was getting out about 5 miles,... mobile RS TRC 447
with
a
single 36" Bulldog fiberglass mounted on driver's side of toolbox.
Read on Wilson FAQ site that when mounting a single antenna it
should
be mounted on the passenger's side of the vehicle. Had never
heard
of
that before. Was heavy into CB 71-88. Had an SBE Console II with
a
Siltronix 90-1 VFO with a homemade 2 element quad mounted on a
homemade
tower made up of two stick of oilfield line pipe. Line pipe cut
in
half, put a pivot point at the top and down low welded a strap to
keep
the antenna pole from flying all the way thru the mount and
crashing
into the ground. Talked a lot with a woman in Nova Scotia,
British
Columbia and Australia. Only bad thing there was this AH out at
29
Palms CA that had a really badly tuned radio. I transmitted like
on
6-10 channels, up and down from a center freq. I could usually
blank
out anyone from coming in the backdoor but this sumbuck when he
keyed
up I know that the lights in Honolulu HA would grow dim. don't
have
any idea what kept him from burning his tower down. I would have
been
afraid to have gotten close to his coax when he keyed up. But he
would
come in my backdoor like the guy that was down the street. Friend
down
the street and I would when that sob got on line would get on line
just
to see if we could talk to each other and there was no way that we
could talk to each other. I really don't relixh running a damned
linear but when you can't even talk on the highway to other
truckers
because of the AH yo have to do something to be able to enjoy it.
But with that quad I could talk to skip barefoot, although the SBE
Console II was tweaked out and I don't remember where on the
wattmeter
it would swing to.
Anyways, I was just wanting to complain some because of the amp.
Paid
the $1.25 per watt which was a good price but no workie goodie
though.
Any suggestions. Been thinking of getting one of the antennas
that
have the big round wire coil in the center of the antenna to mount
on
my pickup. Will this help out any? I understand, or at least
have
heard that running dual antennas, if they are not at least 8ft
apart
they really don't work that well. Ideas on that?
Also I am looking for the CB shop that is in Bridgeport, Texas.
Anyone
got the name/address/phone number for this guy?
Hey take care
73rd's
Blue Dawg
Amplifiers are 100% illegal on CB radios. You are not allowed to
use
them.
Leave it to a keyclown to tell another keyclown to be a keyclown.
|