D Peter Maus wrote:

PowerHouse Communications wrote:
Zenith Trans-Oceanic Royal "3000"

I'm looking for replacement bulbs for the band scale illumination on the
above listed shortwave receiver. The bulb is an older screw-in type that is
powered by a single "D"-Cell battery. I've looked high and low for a
single-cell (1.5V) bulb, but have come up empty handed. The only thing I
have found in the 1.5V category is the "spot" style bulb, which would be
useless in this application.

Anybody else have one of these units that has found replacement bulbs?
Perhaps you made a slight modification to the unit and somehow arranged
something using LEDs? Any advice or thoughts on the matter would be greatly
appreciated.

Details: The bulbs looks like the one pictured he
http://www.topbulb.com/images/bulbs/50.jpg
According to the sight is a "G"-type bulb, although another sight identified
it as an "E"-type? Bulb is 1.5V (or thereabouts), and has "123" printed on
the side, and "*** USA ***" is stamped into the side of the bulb base.

Thanks!



This doesn't directly answer your question, but for my 3000-1, I
pulled a white LED out of my stray parts box and soldered it into
the base of the burned out bulb. I put a thin white paper cover
around the element to disperse bright but narrow beam thoughout
scale tube. Screwed the new piece into the socket and it's brighter
and whiter than the original, with no heat, and lower draw. And
with 100,000 hour life of the LED, there will be no replacement
necessary in my lifetime.

Obviously, this is not the best option for meticulous
restorations, but for daily users, it's a practical improvement.


Please explain how you light a white LED when you only have a single
1.5 Volt cell and white LEDs take 3 volts or more?
http://www.edn.com/index.asp?layout=...cleID=CA339716

--
Link to my "Computers for disabled Veterans" project website deleted
after threats were telephoned to my church.

Michael A. Terrell
Central Florida