August 2nd 05, 04:08 AM
|
|
|
On 7/30/05 11:36 AM, in article ,
"news.dslextreme.com" rte.dslextreme.com wrote:
Hi to the group....would someone give me the pinout for the AC connector for
the Clegg Venus, 12 connector Jones plug on the rear of the
Transceiver?....I have the schematic however that portion is not clear to
me. I believe that there are only two connections, positve and negative but
not certain...Help me bring this lady back to life...Pleas answer in this
newsgroup as my email is not working correctly
I looked at two on-line schematics and both are so bad it's hard to
determine all the connections.
I don't know what you mean by two connections, pos and neg. It looks to me
that there are connections for the AC switch loop-through (1 and 2), Hi
voltage, I think (11), speaker (7), and others that I can't read.
I hope you receive better info than this, but if not maybe you can trace
what's what by starting at the external power supply. It should turn on if
you connect through the AC switch wires.
Good luck.
Don
|