Remove the coil and unscrew it from the bottom. Turn the core over and put
it back in upside down. It has an adjustment notch on each end.

As to removing it. You don't need to remove the board. There is a trap door
under it. Remove the AF unit and you will see it.

--

Clif Holland, KA5IPF
www.avvid.com


"Joshua" wrote in message
...
I don't know if this rig qualifies as a boatanchor, but I thought I would
ask as there are many here who are knowledgable.
I got the rig from a freind.
The 40 meter rf pot has a problem. The ferret core is bottomed out and
won't
screw back (upward) or catch the threads/coil.
Is there a tip or trick to 'grab' the ferret core to get it to catch.?
I'd hate to have to tear the board out or send it out for service.
Any suggestions appreciated. Josh