Ok this is easy enough,
take a small aluminum step stool, put a mirror mount on it
and you will work fine.
Or,
put the antenna in the corner, take two eight wires and run them from the
corner along the wall.
The wires go to the shield side of the coax.
Do you need a Wilson ? it is just a shortened 1/4 wave that is not as
efficient.
Can you use a regular 8 ft whip?
You could tilt it out 45 degrees when you operate.
With skip, cross polarization is not a issue.
If you use a dipole that is horizontal it would be best for skip. You would
be 18 dbi down when working other locals that are vertical.
You would get a little gain out of it over the wilson.
If you need to use a tuner, The station on the other end will never know the
difference
Good Luck, Dan

"Buther Boy" wrote in message
...
I doubt that I will be able to put up a dipole in my living room, and
I've got just enough room in the corner where my radio is located, so
I am wondering if I can put up one or the other of these antennas. I
have a Wilson 5000, which I sometimes use when I'm mobile, and I'm
able to talk skip with that (which will be my goal in this
application). Any thoughts or ideas on installation? How would I
ground this thing? Wilson 5000 or Wilson 5000 Trucker? I'm still
reading to find out which gets the better results, and that would be
the one I would want.

Thanks.

Buther Boy

--
Remove the word Spam from my e-mail to contact me...
http://www.PrivacySig.com/SIGbutherb...mail-black.png
~