"west" writes:

Hello Steve,

Thanks for the interesting PS links. I'm not sure of their HT current
capabilities. I've been wanting to make a good bench HT, Fil, & Bias supply,
for a while now. I have a few ham radio PS that don't quite make it.. The
major drawback is that the Xfrs are only capable of 100ma. At times I could
use a little more that 400ma. Hopefully, someone reading this thread will
come up with a viable suggestion.

Cordially,
west

The best high current PS I have seen uses the same topology as the GE
1-compactron one but uses several 6080 (6AS7) in parallel. I have an
old transformer I am saving for that kind of thing that puts out
650Vct at 850mA. I have a TV transformer that is 550 at 250mA, but it is
being saved also. That's alot of iron.

The basic block will work for any load, just get enough current handling.

Good luck.

Steve.


--
Steven D. Swift, , http://www.novatech-instr.com
NOVATECH INSTRUMENTS, INC. P.O. Box 55997
206.301.8986, fax 206.363.4367 Seattle, Washington 98155 USA