Did you flip the filament switch on?

The CW will work only if the vox system is functional.

IF you still have trouble contact me via my e-mail at

w4nti@NOSPAM mindspring. com

Then when the SPAM catcher gets you, do what it says.

Dan/W4NTI

wrote in message
oups.com...
Hi,

Receiver works okay. However, when I set the FT101 to TUNE and switch
mike to MOX per tuning procedure, I get no final current. Also in CW
mode there is not switching to transmit. Help!!!

Thanks in advance,

The Eternal Squire