Thank you! I think I have it now. I am used to just selecting the "band" I
want and pressing search.

Once the limits are programmed in, turn the sq. dn and an arrow (up or dn)
and it scans the limits programmed.

It took a while to figure that one out!

-N6

"Neuroses 60623" wrote in message
...
Rob,

I have done this, but it takes FOREVER to find anything. Is there a way
to just auto search through frequencies, rather than up or dn through each
step?

-N6

"Rob Cullen" wrote in message
...
Manual
Program
1,2,3,4,5,6,7,8 or 9 (you can set 9 banks)
Limit
enter the lower limit in mhz and press enter
Limit
Enter the higher limit in mhz and press enter
Press up or down arrow to search


"Neuroses 60623" wrote in message
...
Help!

I have recently got my hands on a RS Pro 2006 scanner. I can program
frequencies in 1-at-a-time, but it takes forever.

I have tried to search for "active frequencies" using the directions in
the
manual, but it won't seem to search the Limit assigned bands.

My question is, do I have to program EACH frequencie in, or can I
somehow do
a "band search" like my old Sportcat?

Please help?

-N6