View Single Post
  #2   Report Post  
Old January 10th 06, 01:04 AM posted to rec.radio.cb
Vinnie S.
 
Posts: n/a
Default cable TV interference - Audio only - no picture change

On 9 Jan 2006 15:12:53 -0800, "Jim Bradley" wrote:

Ok here is the deal. At my brother house we have installed a base set
up. We have a mobile radio hooked up to an antron 99. The antron is in
the attic on the 3rd floor of the house mounted in a 22ft tall section
of the attic. The SWR is below 1.5 on all channels. everything is
stock. only one TV in the house is getting audio only interference
nothing else is getting any interference. This is clear as day when
ever you TX.



Jim,

Make sure you are using Belden 9913, or LMR400 coax, or some other 100% shieled
coax,

This happens with the TV muted or unmuted for that matter and even with
the coax unplugged from the back of the TV.


Well, I hate to say this, but the modern day TV receivers are junk, and pick up
anything. The TV might be the problem.


I just bought a B&W TVI filter off ebay in hopes that it might help. Do
you think it will? What else can we do? Please help...


50-50

Vinnie S.