Arie,

The nec listing is below. I am unable to 'edit' the coil, element 2.

In 'edit' mode how are the GH and GM cards edited? (The coil is displayed
intermittently.)

Is there something specific about using tags 101 and 102 as opposed to 1 and 2?

Thanks - Dan

CM Loaded 2 m monopole
CE
GW 1 15 0.4 0 5.6 0.4 0 1.6 0.025
GH 2 50 .32 1.6 .4 .4 .4 .4 0.025
GM 100 0 0 0 0 0 0 4 0
GW 3 15 0.4 0 4 0.4 0 0 0.025
GS 0 0 0.025400
GE 1
GN 1
EX 0 3 15 00 1 0
LD 5 101 1 15 5.8001E7
LD 5 102 1 50 5.8001E7
LD 5 3 1 15 5.8001E7
FR 0 41 0 0 135 2
RP 0 181 1 1000 -90 90 1.00000 1.00000



Arie wrote:
Hello Dan,

to sweep frequencies after having modified or created your model, push
F7, select 'use freq-loop', select one of the options 'Gain' (only
Gain, F/B and F/R line-chart); 'Ver' (vertical pattern for eacht freq),
'Hor' (horizontal pattern) or 'Full' and specify the start- en stop-
frequencies. Then click Generate.

B.t.w, did you read the _GettingStarted.txt file ?

Concerning the 144 mhz / helix problem, for now I am not able to
reproduce it overhere. I would very much like to know about this, could
you give me some more details ?

Arie.