Gary,

I thought I was clever using my voice instead of a tone! Hey you beat me
to it. I figured it would be like a sort of sweep generator for audio. I
make a nice long tape of cq cq cq from wa6lzh helooooo and twek it down
to wear I can barely hear the opposite sb. HT-37 never gets a bod report
now if I can slow that drift down a bit.


73 Tony WA6LZH


BTW The Heat Sideband Adapter (Outboard phasing w band switching) Manual
has an excellent explanation of the phasing method and adjustment
techniques.




Gary Schafer wrote:
I do the same thing! Adjust the side band suppression by listening to
the opposite side band while talking. It seems to work better than
with a tone as the 20A's have considerable hum in them which distorts
the tone ripple on the scope when you get down to low levels.
It also is easier to get the side band suppression balanced on both
side bands that way too.
If you use a tone one side band will end up with more suppression than
the other and you have to work back and forth to get it somewhat
balanced. By talking and listening it comes out better.

73
Gary K4FMX


On 29 Jan 2006 11:57:37 -0800, "Litzendraht" wrote:

Ron,
Are you chasing a specific problem in your exciter or are you just
exercising your test equipment? How is your suppression and voice
quality?
It's been over 40 years since I fooled with Lissajou patterns on a
silly'scope, and that was in electronics school in the Army. But I do
recall that any stray signals, hum, or any distortion of the sine waves
will blur the image. Is your 1kc tone pure and clean? Seems the 20-A
manual calls for something a bit higher like 1225.
You're the first 20-A owner I've ever run across who was scrutinizing
the output of the PSN with a 'scope.
I always just tweaked everything for maximum sideband suppression
and let her rip.

When I built my first SSB phasing rig in 1958 (the infamous W2EWL
design), I borrowed a friends Heath AF generator and silly'scope, and
spent hours trying to get it right.I finally learned to do it by ear by
adjusting everything for minimum modulation with tone input while
listening on the station receiver.

I acquired my 20-A along with a Lakeshore VFO in 1964. It is still my
primary station exciter today. I use it to tickle the grids of a trio
of paralled 807's or the final stage of a Johnson Valiant.

John