Dan,

Try this:

1. Press MANUAL

2. Press keys corresponding to desired frequency and
then the ENTER key.

3. Press keys corresponding to desired channel number
for this frequency (use 0 to preceed single digit channel
numbers).

4. Repeat steps 2 and 3 for entering another frequency
in another channel.

5. If a non-allowed frequency is entered the display will show Fr Err.

Bob


"Dan" wrote in message
news:XdKcg.4958$ei2.2697@trndny02...
Does anyone know how to do a reset on this scanner.All I get when I input
a
freq. is FR ERROR.I hope it is only a reset and not a hardware problem.And
yes the freqs I put in are in range of the scanner.Thanks in advance. Dan