JGBOYLES wrote:
Hi,
I would like to cut a 75 ohm coaxial cable to 30 electrical degrees at 7.2
Mhz. for use in a series matching section. The velocity factor of the cable is
not known. I have an Antenna Analyzer, and and RFsignal generator + the usual.

The impedance of the coax is stamped on the jacket, any way to determine 30
degrees without guessing at the VF?

It's easy to cut a 90deg length, so do that at 21.6MHz.


--
73 from Ian G3SEK 'In Practice' columnist for RadCom (RSGB)
Editor, 'The VHF/UHF DX Book'
http://www.ifwtech.co.uk/g3sek