View Single Post
  #3   Report Post  
Old July 28th 06, 01:15 PM posted to rec.radio.scanner
DougSlug DougSlug is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 27
Default grounding question

When I disconnect my antenna, I attach a 50-Ohm terminator to the free end
of the cable for the purpose of continuously discharging the
naturally-ocurring electrostatic charge.

- Doug


"mikeFNB" wrote in message
...
up to you really
but i'd be very carful about following the old wives tale about
disconnecting your coax during a storm.
this will then charge your coax with static that will discharge through
your equip when you reconnect it.
a shorted connector to a ground line would be much safer, if you wish to
disconnect

mike

"Mike" wrote in message
...
I have a discone antenna on my roof and the mast is grounded to the
earth with #8 solid wire with a ground rod.
I want to use lmr-400 wire for app 50 ft to the scanner. Is it
necessary to install the cable with an in-line arrestor ? I hate to
have to add more connectors if it isnt necessary...I always unplug the
scanner from my cable, rg-58, when Im not using it.....Any
thoughts.....Thanks Mike