P.S. IF you are really desperate, either remove
the silver cover, or drill a hole , about dead
center, in the (Power. Letter, as in ,where,say
1000 C, in the rectangular box),Just the aluminium
plate, NOT any deeper!).This about 6 o'clock
position. There is a calibration pot accessable
thru an access hole in the slug, and can be
adjusted- BUT I highly recommend against it! Jim
NN7K

Jim - NN7K wrote:
Heck best thing can do, is find someone else with a wattmeter, and then
compare the measurement, vs.
your slug/wattmeter. If within +- 5 % don't worry! You wouldn't even
hear the diff at 10 %!, but if memory serves, these are susposed to be
accurate to 5%.. Jim NN7K


L. wrote:
wrote in message
oups.com...
I have a 2,500 watt, HF slug that I don't have confidence in. Anyone
know who calibrates slugs for a reasonable fee?

Thanks.
Jeff
W8KZW

Have you contacted Bird? Last I heard, they were still making
equipment. As to "reasonable" - thats a good question. But then at
least you would know it is "accurate".

L.