Yagi Height Question
"Cecil Moore" wrote in message
t...
CW wrote:
I've been wondering for some time now why amateur operators don't build
their Yagi antenna's
so they can be raised and lowered about 10ft in addition to being
rotated.
Many do, using motor driven towers. In addition to lowering
their arrays when a storm hits, some raise and lower their
towers during marginal conditions to maximize signal strength.
--
its really only practical on crank up type towers, for those with guyed
towers its usually not possible.
10' change on 20m would likely not be very useful though. my hf stacks for
10/15/20 are all spaced 30' apart, 40m is spaced about 80'. even with those
height changes (which i can select instantly so i can make direct
comparisons without worrying about fading) there is often little difference
between antennas... though sometims there is a lot of difference. This
highlights the fact that often the signals arrive with a wide range of
angles, though at some times they must be in a relatively narrow range. so
having multiple antennas at different heights that can be selected in
various combinations is a handy thing to do.
|