July 19th 03, 02:53 PM
|
|
|
It's nice to use plastic end caps (most yagi manufacturers will sell you
a few) so the practical distance for the holes is just far enough so
that the end cap will push in without fouling anything inside.
Or make it about pi/2 times the width of your thumb, and then trim the
end cap until it fits... no worries.
--
73 from Ian G3SEK 'In Practice' columnist for RadCom (RSGB)
Editor, 'The VHF/UHF DX Book'
http://www.ifwtech.co.uk/g3sek
Lovely. Thanks Ian.
Steve
|