You could try a hammer.... a really big hammer lol
Robert
VE3 something or other
"Clif Holland" wrote in message
...
Does the internal calibrator work?

If so check the RX antenna switch beside the coax connector. It's easy to
switch it when removing or replacing the coax.

Neither fan operates at turn-on, both are temperature controlled.

--
Clif Holland, KA5IPF
AVVid
Authorized Kenwood and Icom Service Center
816 W Shady Grove Rd
Irving, TX 75060

www.avvid.com

1-800-214-5779
972-870-0630 (local)


"Winston" wrote in message
...
I powered up my old TS-930 S yesterday and there was no RX. TX
operation appears to be normal. It seems that I have lost signal
somewhere between the front end and the detector. I suspect switching
or something in the RF section. I have no meter readings in receive.

For some reason the power supply and final fans are also not running.
I think that I remember that one of those fans would come on at power
up.

Any ideas?

Thanks.

Win/W0LZ