"Jeßus" wrote in message
newsan.2006.11.02.01.00.49.365331@anunnakis@area 51.org
Picked up a 208H yesterday. Nice rig all round, especially if space
is an issue. I'm quite impressed with the receiver, also a healthy
50W on UHF doesn't hurt. You get a reasonable length separation cable
for the controller, BUT the mic cable is only about a metre long and
connects
to the main body of the radio, so basically you cannot remote mount
the main unit any real distance. Why bother supplying a decent length
cable for head but not for the mic makes no sense to me.

The other thing is no bracket supplied for the controller/remote
head... Of course, you can buy these things as 'optional extras', and
presumably pay right through the nose for them too.

I tried velcro for mounting the head, however its just a tad too heavy
to be reliable. Looking at the OEM bracket, it ain't much at all, and
in fact uses velcro to secure to the head. If I had the appropriate
tools (which I don't) it would be pretty easy to fabricate one. I'll
keep my eyes open, something should come along that'll suit.

Anyway, I was thinking why not use ordinary CAT5 or similar for the
mic cable and/or the separation cable? Has anyone done this, and if
so a wiring diagram?

Failing any of the above, if you know of any aftermarket equivalents
for any of the above, also for the data cable, please spill the
beans... most appreciated

the fact the mike is not mounted on the control head seems to me be a
major design fault. after all, phillips, tait, etc. got it right all that
time ago...a retrograde step indeed.. just my two bobs worth............j
(sorry no solutions :^) )