SW-3 Questions
"Roger D Johnson" wrote in message
...
The SW-3 I recently acquired has all sections of the voltage
divider open! I have the values of the individual sections but
not sure how they are arranged. It appears that the 6900 Ohm
section goes to B+ and then thru the 2000 Ohm section and 3100
Ohms to ground.
My receiver is set up for 2.5 volt filaments and I would like
to operate it from 6 volts. Half the sites I visit say the 6C6
is the sub and the other half says 6D6! Which is the better
choice?
Neither, use a 77 or 78.
John H.
|