Hi Roger,

Regarding the tubes, I now see what you mean. The SW-3 here contains 6D6
tubes.

"Roger D Johnson" wrote in message
...
The SW-3 I recently acquired has all sections of the voltage
divider open! I have the values of the individual sections but
not sure how they are arranged. It appears that the 6900 Ohm
section goes to B+ and then thru the 2000 Ohm section and 3100
Ohms to ground.

My receiver is set up for 2.5 volt filaments and I would like
to operate it from 6 volts. Half the sites I visit say the 6C6
is the sub and the other half says 6D6! Which is the better
choice?

Thanks and 73, Roger N1RJ
--
Remove tilde (~) to reply

Remember the USS Liberty (AGTR-5)
http://ussliberty.org/
_______________________________________________
National mailing list

http://mailman.qth.net/mailman/listinfo/national