Jack Schmidling wrote:
Mike Andrews wrote:

Note also that you'll need to remove the copper shunt, if one is
present, from the transformer laminations, _and_ that one side of the
HV winding may be grounded to the XFMR frame.

Never gave any thought to this but the one problem I see is that I need
a center tapped transformer to use with 866's and the microwave ones do
not seem to be.

It is not, no. You can use two out of phase, but that kills your volume
requirements.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."