Icom IC-R7100 receiver/scanner problem
If the reset does'nt work I would suspect the VCO/PLL for the lower
bands is going out of lock. Usually an unlock indication will mute audio.
Ed Majden wrote:
I have an ICOM IC-R7100 receiver/scanner that has a problem. I can
receive nothing below 250 mhz. There is no hiss or noise, just like if the
squelch was fully turned up, and it is not. It works fine from 250 mhz+ to
762 mhz where it sometimes cuts out as described above. Any idea of what is
wrong with it??? Does anyone have a schematic or repair handbook for this
radio? Thanks for the help.
Ed
--
Joe Leikhim K4SAT
"The RFI-EMI-GUY"©
"Treason doth never prosper: what's the reason?
For if it prosper, none dare call it treason."
"Follow The Money" ;-P
|