On Mar 10, 5:18 am, wrote:
Hi chaps,

I suspect a neighbour of a friend of mine is using an ultrasonic bird-
scarer to frighten off his pets. The man concerned won´t admit to it,
but there are times when his dog and two cats just seem to get
suddenly very distressed and hypermanic for no apparent reason. I`d
like to at least eliminate this possibility before considering any
others. So the question is, what´s the simplest way to detect
ultrasound? My web research leads me to believe the area of interest
is between 20 and 30khz. Most common bird scarers warble between these
two limits which are of course above the range of human hearing. I´ve
acquired an ultrasonic transducer that transmits on 41khz. If I couple
this up to a wien-bridge oscillator trimmed to the same frequency, I
figure I ought to be able to hear a warble if indeed this guy is using
a birdscarer, because the difference between 41khz and 20khz-30khz
will be audible to me. Is this feasible to "air mix" the two
frequencies in this simple way and hear a result, or is something more
complicated required?
Thanks!

You need your detector to be low Q since you don't know the offending
frequency. Some of these fancy sound cards do 196kHz sampling. A
piezo microphone with amp into the sound card might do the trick.

Also, as other have suggest, the bat detector.