View Single Post
  #26   Report Post  
Old March 14th 07, 12:17 PM posted to rec.radio.amateur.homebrew,sci.electronics.design
Andrew VK3BFA Andrew VK3BFA is offline
external usenet poster
 
First recorded activity by RadioBanter: Jul 2006
Posts: 28
Default Detecting Ultrasound

On Mar 11, 1:19 am, PeterD wrote:
On 10 Mar 2007 05:18:34 -0800,
wrote:



Hi chaps,


I suspect a neighbour of a friend of mine is using an ultrasonic bird-
scarer to frighten off his pets. The man concerned won´t admit to it,
but there are times when his dog and two cats just seem to get
suddenly very distressed and hypermanic for no apparent reason. I`d
like to at least eliminate this possibility before considering any
others. So the question is, what´s the simplest way to detect
ultrasound? My web research leads me to believe the area of interest
is between 20 and 30khz. Most common bird scarers warble between these
two limits which are of course above the range of human hearing. I´ve
acquired an ultrasonic transducer that transmits on 41khz. If I couple
this up to a wien-bridge oscillator trimmed to the same frequency, I
figure I ought to be able to hear a warble if indeed this guy is using
a birdscarer, because the difference between 41khz and 20khz-30khz
will be audible to me. Is this feasible to "air mix" the two
frequencies in this simple way and hear a result, or is something more
complicated required?
Thanks!


Why worry about it... His yard, his pets, his life...

OK,

Take a microphone with a frequency response 30Khz, and an amplifer.
Monitor the amp's output with a scope. bg


Agree. Even a bog standard electret for $1 will do it - probably
wouldn't even need an amplifier......if you want to get sophisticated,
put it in the end of a piece of 30mm plastic pipe - voila, directional
microphone....

The alternative is you are just being paranoid......but I know you
know that anyway...

Andrew VK3BFA.