I have a very old Mosley TA-33 Jr antenna and one element; the smaller tube
is stuck in the larger tube. This is the middle tube and only 3 foot long
and about 3/4 inches in diameter with about 1 inch sticking out of the
larger tube. I have tried pulling then apart with a bumper jack and vice
grips but have had no luck. The elements are not bent nor do they have any
dents. I suspects oxidation of the elements is the problem. I have also
tried using ammonia but no help. Any suggestions on pulling then apart would
be greatly appreciated. .
Bob, AA8X
===================================
Although I have never needed to do it myself and risking some negative
comments , may I suggest you explore the following :

Flow water through the inner tube and heat the outer tube (localy) with
a flame torch , in the hope the inner tube diameter remains roughly the
same ,whereas the outer tube will expand such that you MIGHT be able to
pull the tubes apart.


Frank GM0CSZ / KN6WH