
September 28th 07, 07:14 AM
posted to rec.radio.shortwave
|
external usenet poster
|
|
First recorded activity by RadioBanter: Jun 2006
Posts: 317
|
|
KNX 1070 exhibits severe motorboating at night
On Sep 26, 11:37 pm, RHF wrote:
On Sep 26, 11:14 pm, wrote:
On Sep 25, 8:52 am, RHF wrote:
On Sep 25, 7:13 am, David wrote:
On Mon, 24 Sep 2007 21:13:43 -0700, wrote:
I suppose I can try KNX this morning, but I don't see any reason for
IBOC to cause motorboating. Granted IBOC sucks in many other ways, but
it should not have such an effect on the analog signal.
It's part of the IBOC signal. If you have selectable single sideband
listen to any HD AM station, one sideband only; you'll hear it quite
clearly. It's a warbling signal at approx. 400 Hz.
David - My Point Is - I Am Hearing This With An "HD" Radio :
THIS IS BAD NEWS FOR "HD" AM/MW RADIO LISTENERS !
I am hearing more and more of what we use to call
Automotive Engine {Ingition} Noise {at very High RPM}
with the Radi-Osophy HD-100 Radio.
THIS IS BAD NEWS FOR "HD" AM/MW RADIO BROADCASTERS !
When I first got this "HD" Radio this Noise was not as
noticeable -but- now it is the 'preponderant' sound across
the AM/MW Band except when there is a Clean and Clear
Analog AM/MW Radio Station to listen to on any given
Frequency.
-NOTE- This HD Radio "Noise" Background is so strong
that IMHO most 2nd and 3rd Generation "HD" Radios
should have a Squelch Knob to quiet-out this Noise so
that a Radio Listener only has to hear those 'local'
AM/MW Radio Stations with a Clean and Clear Signal :
Be it Analog or Digital.
I Ask Myself : What IBOC ?
All I See Is The Blinking Blue Light ! ~ RHF
In That Distant Land* Where IBOC Fears To Go :
Life Exists and Radio Listeners Live Beyond the 10mv/m Contour.
* Twain Harte, CA -USA-
.
Yes, I didn't understand you were using an IBOC radio. I have no
experience with one, other than trying to play with one at Fry's and
not getting it to work.
I notice that some of the IBOC hash does reach the analog channel,
even using a very selective filter. That is, the noise floor of the
analog signal is raised a bit. This is noticeable on very clean AM
signals.- Hide quoted text -
- Show quoted text -
M...Sushi,
The Radi-Osophy HD-100 Radio was functioning in the
Analogy Mode. Had a GE Superadio III sitting next to
it and basically heard the same thing on it.
It just may be that I am at the 'right distance' from the
Radio Station's Transmitter where It's Analog and Digital
Signals 'Interact' and cause the sound effect heard.
-Or- More likely it is the Analog Signal of One Radio
Station being Trashed by the Digital Side Band of an
Adjacent Channel's Radio Station. Again being at the
'right-distance' to where the two Signals 'Interact' and
cause the sound effect heard.
AM/MW "HD" Radio is 'by-design' Engineered to Interfer
with the two Adjacent AM/MW Radio Channels at 10 kHz.http://electronicdesign.com/Files/29.../Figure_02.gif
I Ask Myself : What IBOC ?
All I See Is The Blinking Blue Light ! ~ RHF
In That Distant Land* Where IBOC Fears To Go :
Life Exists and Radio Listeners Live Beyond the 10mv/m Contour.
* Twain Harte, CA -USA-
.
I wonder if the iboc signal is messing with the analog AGC, making the
signal motorboat.
|