Thread: 102BX
View Single Post
  #5   Report Post  
Old December 13th 07, 04:33 PM posted to rec.radio.amateur.boatanchors
K3HVG[_2_] K3HVG[_2_] is offline
external usenet poster
 
First recorded activity by RadioBanter: Apr 2007
Posts: 122
Default 102BX

Harold E. Johnson wrote:
"K3HVG" wrote in message
. ..
Fred Cameron wrote:
Doug,

Thank you for your help with a power cord.

The radio arrived today without a microphone.

Since I know nothing about the radio, what microphone do you recommend
for this radio?

Thank you again for your help!

Fred in SC
W4FCM

The mic is any low-Z, single-button carbon mic. The T-17 or the M-15UR
will work, assuming the mic, itself, is good. The mic that comes with the
radio set looks like a 50's Motorola mobile mic, so any of those or
similar, good quality carbon mics will also work (and recommended!). The
mic plug is a standard military PL-68 with tip being PTT, ring being mic
hot, and the shell is ground.


Whooooooooeee! I have no idea what you're smoking these days, but the manual
says that the mike input impedance is 47KOhms. (High impedance dynamic or
crystal mike). There is no Voltage source for the microphone which a carbon
microphone would require. (That also lets out the use of a non-self powered
electret mike.) The microphone plug is not a PL-68, which is 3/16 inches in
diameter, but rather a three terminal 1/4 inch jack. (Stereo plug). You did
get the connections right.

W4ZCB




If were talking about the Chinese 102 radio set, it is carbon. If
another set is being referred to... I don't know what that set is?