Richard Knoppow wrote:
The 50L6 is NOT a relative of the 6L6. It is a pentode
power tube with 10 watts of plate dissipation compared to 19
watts for a 6L6. The 6L6 puts out about 2.5 times the power
when operating as a single tube Class-1A aplifier. Other
characteristics are also different.

Yeesh! That is not good at all! That is a very misleading number in
that case.

What about the 25L6 then? I have pitched a lot of 25L6 tubes
over the years because they showed low transconductance compared with a 6L6.
--scott


--
"C'est un Nagra. C'est suisse, et tres, tres precis."