RadioBanter - View Single Post - Icom IC-2100H mic problem

edgardom · January 23rd 09, 08:17 AM

Quote:

Originally Posted by John Doe

Icom HM-98 Schematics, hope this helps!

http://www.mods.dk/downloadmanual.ph...67054634h4.zip

http://www.mods.dk/downloadmanual.ph..._Schematic.pdf

73's

wrote in message
oups.com...
I too am having this mic problem (HM98s) with my IC-2100h radio.
The mic lights up and the red indicator on the mic lights when PTT is
actuated
but the mic does not communicate with the radio. Functions , DTMF ,
PTT,audio, dont work for days at a time then all is well again without
having done anything
to the radio. The radio lives indoors on a power supply, has had very
little
transmitting time. There is no indication on the bar graph output power
level display indicating that PTT has been pressed. I did a CPU reset.
Nothing. I dont think its the mic itself because I tried a mic from
another working radio and still no response. Taking the mic from this
unit and trying it on the other working radio, it works fine. The
function buttons on the radio itself all work fine. The lock is not
engaged on the radio or the mic.

Has anybody resolved this since it was posted in 2002?
Bryan
Hi
If you have problem with is the dio culprit that need replacement that should fix it. look in the schematic where is located this is the one it make it swich for receiving and transmit your mic is ok replace the dio.

Mike wrote:
Just recently, my HS-98 microphone has ceased working. If I plug it
in, the
key pad lights up, but nothing works, and everytime a button or PTT
is
pushed, the red light lights up on the mic. Should I send it in and
have it
repaired, or should I spend the $90 to get a new one? Or does
somebody have
fix for my mic. Any help would be graetfully appreciated.
73's
Mike
KC2JGA
From the desk of KC2JGA

Hi
If you have problem with it is the dio culprit that need replacement that should fix it. look in the schematic where is located this is the one it make it swich for receiving and transmit your mic is ok replace the dio.
--