"Scott Dorsey" wrote in message
...
N9NEO wrote:
You want a reverse screw bit. It will drill a little bit, and in the
process it will loosen the setscrew. Try a local auto parts store for
a set of them.... most of the auto places only sell cheapies but they
will do the job once or twice.

Next screw I think I'll try some WD and a little heat.

WD-40 is basically useless as a penetrating oil. Try PB Blaster or
Break-Free or something designed for the job.
--scott



Scott gives good advice! I would definitely try the reverse screw
bits.

Pete