_J D_ wrote:
Hi, In need of one. Have posted in the
Discussion group
rec.antiques.radio+phono.
One of the 2 mounting solder tabs on bottom of
coil, also serves as a ground to chassis.

Mike*wrote:*****
Which winding is open?

Mike,
Two of them are open.
In the photo of actual coil you can just make out a thin strand of wire
on the upper lower side left tab, runs a bit under that 25 mmf cap. Use
to be connect to the center of the coil winding.
On the schematic its the lower right coil sign. The other break is
internal somewhere, at upper smaller coil sign near T2.