Edward Knobloch wrote:
On 4/2/2010 9:38 AM, Scott Dorsey wrote:
[Turner] Model 252. Low-Z version of the 250 with the lift switch (which I strongly
discourage the use of). If you were using a Viking II you would probably want
the 250 or to use a step-up transformer.

By "lift switch" do you mean the switch contacts to complete the circuit
to the mic element? Or did that mic include a switch
on the bottom, so that when you pick it up, you transmit?

It's a switch on the bottom so you transmit when you pick up the mike. There
is a locking switch that disables it, but the locking switch sometimes gets
dislodged when the mike is knocked over.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."