Thread: Digital modes: What frequency am I on?
View Single Post
  #7   Report Post  
Old September 7th 10, 06:40 PM posted to rec.radio.amateur.digital.misc
Steve Smith Steve Smith is offline
external usenet poster
  
First recorded activity by RadioBanter: Sep 2010
Posts: 2
Default Digital modes: What frequency am I on?
On 8/20/2010 4:53 PM, wrote:
Bert wrote:
In wrote:

When you do that, every program I've seen so far sets the transmit
audio offset, i.e. the effective transmit frequency, to the received
audio offset.
OK; that's an important piece of information. I had simply assumed that
the generated audio would be at some fixed frequency.

Digital QSO's normally take place on the same frequency for both sides, so
the transmitter audio offset has to match the receiver audio offset for it
to work.


This is typically done automatically by the software for you. Your
audio will be at the same tone as the receive if you are clicked onto
the receive waterfall, which you would be in order to receive the
station's data. So, no changes in transmitter or software will be needed.

Reply With QuoteReply With Quote