OK This is an all glass, flat-end envelope. Not much larger than a 50C5,
but a bit larger. Coated, can't see inside.
Yikes! they actually used magnetic deflection. I was hoping for
electrostatic, but with 9 pins that may be difficult. Been too long to
remember how many electrodes are needed for grid, focus & any more anodes.
Leseee.
2 fil
1-cathode.
4- dif plates
1-focus
1- accel anode

That's 9......maybe you need more...Oops, forgot the grid. Make the cathode
common with one of the filament lines or make it directly heated.......Oh
well. If it needs coils it'll make a nice conversation piece.

73, Steve

" Uncle Peter" wrote in message
news:4hWLb.29705$WQ3.6987@lakeread05...

"Michael A. Terrell" wrote in message
...
If it is from a camcorder, it should have a deflection yoke. How
about some pictures? It might trigger someone to recognize it.

Suitable newsgroups a
news:alt.binaries.schematics.electronic
news:alt.binaries.pictures.radio

Also, you can lay small parts on a flatbed scanner, cover them with a
sheet of white paper, and put a light over the paper to reduce shadows.
Yo can get good close-ups this way. I usually scan at 600 DPI, and
reduce image size to what I want. I would post a picture, an ask the
guys on news:sci.electronics.repair if anyone there can identify it.

--
We now return you to our normally scheduled programming.

Take a look at this little cutie! ;-)
http://home.earthlink.net/~mike.terrell/photos.html

Michael A. Terrell
Central Florida

Many early systems used separate cameras and a suitcase
VCR. My RCA camera had a removable viewfinder which
used a minature CRT with a yoke.

Pete