In article ,
wrote:

Get ready to remove the tank,pump is inside..run the
pump power through a pair of coax caps (about .1 to .25 OK ) mount them
directly at the pump terminals on the tank..that will get about 90% of
the noise..ground the tail pipe at the back bumper ,good braid ground.
None of the Ford dealers that I contacted wanted to talk about the
problem,never heard of it .. Good luck W4PQW

Tell the dealer to look up Ford's technical service bulletin
TSB 93-15-6 and/or TSB 95-11-3 (I believe the latter is an updated
version of the former). This describes the problem, identifies the
Ford filter part which is to be installed inside the fuel tank on the
pump wiring, and describes the procedure.

This is reportedly _not_ a customer-installable fix. As it involves
removing the fuel pump from the tank itself, and modifying wiring in
this area, I'm not too surprised that Ford would be very reluctant to
encourage vehicle owners to attempt this on their own.


--
Dave Platt AE6EO
Hosting the Jade Warrior home page: http://www.radagast.org/jade-warrior
I do _not_ wish to receive unsolicited commercial email, and I will
boycott any company which has the gall to send me such ads!